Top
Back: Module orderings
Forward: Product orderings
FastBack: Representation of mathematical objects
FastForward: Mathematical background
Up: Monomial orderings
Top: Singular Manual
Contents: Table of Contents
Index: Index
About: About this document

B.2.6 Matrix orderings

Let $M$be an invertible $(n \times n)$-matrix with integer coefficients and $M_1, \ldots, M_n$ the rows of $M$.

The M-ordering < is defined as follows:
         $x^a < x^b \Leftrightarrow \exists\ 1 \leq i \leq n : M_1 a = \; M_1 b, \ldots, M_{i-1} a = \; M_{i-1} b$ and $M_i a < \; M_i b$.

Thus, $x^a < x^b$ if and only if $M a$ is smaller than $M b$with respect to the lexicographical ordering.

The following matrices represent (for 3 variables) the global and local orderings defined above (note that the matrix is not uniquely determined by the ordering):

$\quad$ lp: $\left(\matrix{ 1 & 0 & 0 \cr 0 & 1 & 0 \cr 0 & 0 & 1 \cr }\right)$     dp: $\left(\matrix{ 1 & 1 & 1 \cr 0 & 0 &-1 \cr 0 &-1 & 0 \cr }\right)$     Dp: $\left(\matrix{ 1 & 1 & 1 \cr 1 & 0 & 0 \cr 0 & 1 & 0 \cr }\right)$

$\quad$ wp(1,2,3): $\left(\matrix{ 1 & 2 & 3 \cr 0 & 0 &-1 \cr 0 &-1 & 0 \cr }\right)$     Wp(1,2,3): $\left(\matrix{ 1 & 2 & 3 \cr 1 & 0 & 0 \cr 0 & 1 & 0 \cr }\right)$

$\quad$ ls: $\left(\matrix{ -1 & 0 & 0 \cr 0 &-1 & 0 \cr 0 & 0 &-1 \cr }\right)$     ds: $\left(\matrix{ -1 &-1 &-1 \cr 0 & 0 &-1 \cr 0 &-1 & 0 \cr }\right)$     Ds: $\left(\matrix{ -1 &-1 &-1 \cr 1 & 0 & 0 \cr 0 & 1 & 0 \cr }\right)$

$\quad$ ws(1,2,3): $\left(\matrix{ -1 &-2 &-3 \cr 0 & 0 &-1 \cr 0 &-1 & 0 \cr }\right)$     Ws(1,2,3): $\left(\matrix{ -1 &-2 &-3 \cr 1 & 0 & 0 \cr 0 & 1 & 0 \cr }\right)$

Product orderings (see next section) represented by a matrix:

$\quad$ (dp(3), wp(1,2,3)): $\left(\matrix{ 1& 1& 1& 0& 0& 0 \cr 0& 0& -1& 0& 0& 0 \cr 0& -1& 0& 0& 0& 0 \cr 0& 0& 0& 1& 2& 3 \cr 0& 0& 0& 0& 0& -1 \cr 0& 0& 0& 0& -1& 0 \cr }\right)$

$\quad$ (Dp(3), ds(3)): $\left(\matrix{ 1& 1& 1& 0& 0& 0 \cr 1& 0& 0& 0& 0& 0 \cr 0& 1& 0& 0& 0& 0 \cr 0& 0& 0& -1& -1& -1 \cr 0& 0& 0& 0& 0& -1 \cr 0& 0& 0& 0& -1& 0 \cr }\right)$

Orderings with extra weight vector (see below) represented by a matrix:

$\quad$ (dp(3), a(1,2,3),dp(3)): $\left(\matrix{ 1& 1& 1& 0& 0& 0 \cr 0& 0& -1& 0& 0& 0 \cr 0& -1& 0& 0& 0& 0 \cr... ... \cr 0& 0& 0& 1& 1& 1 \cr 0& 0& 0& 0& 0& -1 \cr 0& 0& 0& 0& -1& 0 \cr }\right)$

$\quad$ (a(1,2,3,4,5),Dp(3), ds(3)): $\left(\matrix{ 1& 2& 3& 4& 5& 0 \cr 1& 1& 1& 0& 0& 0 \cr 1& 0& 0& 0& 0& 0 \cr 0... ... 0& 0& 0& -1& -1& -1 \cr 0& 0& 0& 0& 0 & -1 \cr 0& 0& 0& 0& -1& 0 \cr }\right)$


Example:
 
  ring r = 0, (x,y,z), M(1, 0, 0,   0, 1, 0,   0, 0, 1);

which may also be written as:
 
  intmat m[3][3]=1, 0, 0, 0, 1, 0, 0, 0, 1;
  m;
==> 1,0,0,
==> 0,1,0,
==> 0,0,1 
  ring r = 0, (x,y,z), M(m);
  r;
==> //   characteristic : 0
==> //   number of vars : 3
==> //        block   1 : ordering M
==> //                  : names    x y z
==> //                  : weights  1 0 0
==> //                  : weights  0 1 0
==> //                  : weights  0 0 1
==> //        block   2 : ordering C

If the ring has $n$variables and the matrix does not contain $n\times n$entries, an error message is given.

WARNING: SINGULAR does not check whether the matrix has full rank. In such a case some computations might not terminate, others may not give a sensible result.

Having these matrix orderings SINGULAR can compute standard bases for any monomial ordering which is compatible with the natural semigroup structure. In practice the global and local orderings together with block orderings should be sufficient in most cases. These orderings are faster than the corresponding matrix orderings, since evaluating a matrix product is time consuming.

Top Back: Module orderings Forward: Product orderings FastBack: Representation of mathematical objects FastForward: Mathematical background Up: Monomial orderings Top: Singular Manual Contents: Table of Contents Index: Index About: About this document
            User manual for Singular version 4-0-3, 2016, generated by texi2html.